Sysmex Hematology Reaegnts SYSMEX XE-2100 CBC Analyzers ( with
Intended Use To be used for blood cell counting, sizing, and WBC
differentiation, hemoglobin determination on Sysmex XE-5000 XE-2100
|Sysmex XE-5000 XE-2100|
|Cat. No||Description||Pack Size|
|DWX-50121||NR PACK||DILUENT-SNR+DYESNR 1L+12ml|
The reagengts are for in vitro diagnostic used only.
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop
using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at
room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of
contaminated packaging materials, please comply with local
6. It is strictly forbidden to eat and avoid contact with eyes and
skin. Once Contact your eyes and skin,please clean immediately with
plenty of water and seek medical advice.
Limitations of Detection Method
If the temperature of the reagent is out of the specified range,
the specimen's measurement parameters may appear abnormal. If in
this condition, please confirm the measurement parameters with the
microscopy method. Please refer to the instrument operation manual
The product should be stored in 2℃-35℃ and the storage period is 2
years. After opening the bottle, it is used in 15℃-30℃, and the
validity period is 60 days.
Can reagents be used in different model?
The reagents of different brands can not be used in general, and
some reagents of same brands can be applied in different models.
Such as ST-Diluent and ST-Clean of SYSMEX; Diluent-CD3200 of Ruby
and CD3200 of ABBOTT etc. The same reagent for product code can be
used for general purpose, please refer to our product brochure.