Dewei Medical Equipment Co., Ltd
Work for Human Health! Best service to you by the outstanding R&D and cost-effective products.
Add to Cart
Medical Chemistry Analyzer stable CBC Hematology Reagents For BC-5600 BC-5500 BC-5800 Room Temperature with Barcode
Intended Use of Mindray 5 part reagents To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Mindray BC-5600 BC-5500 BC-5200 hematology analyzers. This product is for In Vitro Diagnostic use only. Specification of Mindray 5 part reagents
| Reagents on Mindray BC-5800 BC-5600 BC-5500 BC-5200 ( with Barcode ) | ||
| Cat. No | Description | Pack Size |
| DWX-50215 | DILUENT-BC58 | 20L |
| DWX-50216 | LYSE-58LEO(I) | 1L×4/4L×1 |
| DWX-50217 | LYSE-58LEO(II) | 500ml×4 |
| DWX-50218 | LYSE-58LH | 500ml×4 |
| DWX-50219 | LYSE-58LBA | 1L×4/4L×1 |
| DWX-50220 | RINSE-BC5 | 1L×4 |
| DWX-50221 | PROBE-BC | 50ml |
Limitations of Detection Method
If the temperature of the reagent is out of the specified range, the specimen's measurement parameters may appear abnormal. If in this condition, please confirm the measurement parameters with the microscopy method. Please refer to the instrument operation manual for details.
Storage
The product should be stored in 2℃-35℃ and the storage period is 2 years. After opening the bottle, it is used in 15℃-30℃, and the validity period is 60 days.
Attention
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of contaminated packaging materials, please comply with local regulations;
6. It is strictly forbidden to eat and avoid contact with eyes and skin. Once Contact your eyes and skin,please clean immediately with plenty of water and seek medical advice.
Some product questions you may want to ask:
1) What is the principle of 3 part hematology analyzer?
In a 3-part analyzer the cell counting is based on the Coulter Principle. All hematology analyzers utilise Coulter's Principle. 3-part differential cell counter employs Coulter's Principle to determine the size as well as volume of the cells. Coulter's principle is applied employing two electrodes.
2) What is the diluent in the hematology analyzer?
The diluent for the hematology analyzer comprises sodium chloride, sodium sulfate, a phosphate buffer agent, ethylene diamine tetraacetic acid, 1-pyridone-2-sulphur and formaldehyde, and the pH value of the solution is 6.5-7.4, and preferably is 7.2; the content of each component is preferably as follows: 5g/L of ...
3) What is the use of Lyse in hematology analyzer?
It is used to lyse (destroy) red blood celis for hemogiobin determinations or aid in the counting of white blood cells. Applicable to the hematology analyzers.
4) Can cell counter reagents be used in different model?
The reagents of different brands can not be used in general, and some reagents of same brands can be applied in different models. Such as ST-Diluent and ST-Clean of SYSMEX; Diluent-CD3200 of Ruby and CD3200 of ABBOTT etc. The same reagent for product code can be used for general purpose, please refer to our product brochure.